GNU Octave Manual Version 3 by John W. Eaton, David Bateman, Søren Hauberg Paperback (6"x9"), 568 pages ISBN 095461206X RRP £24.95 ($39.95) 
22.2 DifferentialAlgebraic Equations
The function daspk
can be used to solve DAEs of the form
0 = f (xdot, x, t), x(t=0) = x_0, xdot(t=0) = xdot_0
where xdot
is the derivative of x. The equation is solved using Petzold's DAE solver Daspk.
 Loadable Function: [x, xdot, istate, msg] = daspk (fcn, x_0, xdot_0, t, t_crit)
 Solve the set of differentialalgebraic equations
0 = f (x, xdot, t)
withx(t_0) = x_0, xdot(t_0) = xdot_0
The solution is returned in the matrices x and xdot, with each row in the result matrices corresponding to one of the elements in the vector t. The first element of t should be t_0 and correspond to the initial state of the system x_0 and its derivative xdot_0, so that the first row of the output x is x_0 and the first row of the output xdot is xdot_0.
The first argument, fcn, is a string or a two element cell array of strings, inline or function handle, that names the function, to call to compute the vector of residuals for the set of equations. It must have the form
res = f (x, xdot, t)
in which x, xdot, and res are vectors, and t is a scalar.
If fcn is a twoelement string array, the first element names the function f described above, and the second element names a function to compute the modified Jacobian
df df jac =  + c  dx d xdot
The modified Jacobian function must have the form
jac = j (x, xdot, t, c)
The second and third arguments to
daspk
specify the initial condition of the states and their derivatives, and the fourth argument specifies a vector of output times at which the solution is desired, including the time corresponding to the initial condition.The set of initial states and derivatives are not strictly required to be consistent. If they are not consistent, you must use the
daspk_options
function to provide additional information so thatdaspk
can compute a consistent starting point.The fifth argument is optional, and may be used to specify a set of times that the DAE solver should not integrate past. It is useful for avoiding difficulties with singularities and points where there is a discontinuity in the derivative.
After a successful computation, the value of istate will be greater than zero (consistent with the Fortran version of Daspk).
If the computation is not successful, the value of istate will be less than zero and msg will contain additional information.
You can use the function
daspk_options
to set optional parameters fordaspk
.See also dassl
 Loadable Function: daspk_options (opt, val)
 When called with two arguments, this function
allows you to set options parameters for the function
daspk
. Given one argument,daspk_options
returns the value of the corresponding option. If no arguments are supplied, the names of all the available options and their current values are displayed.Options include
"absolute tolerance"
 Absolute tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the relative tolerance must also be a vector of the same length.
"relative tolerance"

Relative tolerance. May be either vector or scalar. If a vector, it
must match the dimension of the state vector, and the absolute
tolerance must also be a vector of the same length.
The local error test applied at each integration step is
abs (local error in x(i)) <= rtol(i) * abs (Y(i)) + atol(i)
"compute consistent initial condition"

Denoting the differential variables in the state vector by ‘Y_d’
and the algebraic variables by ‘Y_a’,
ddaspk
can solve one of two initialization problems: Given Y_d, calculate Y_a and Y'_d
 Given Y', calculate Y.
"algebraic variables"
option to declare which variables in the problem are algebraic. "use initial condition heuristics"
 Set to a nonzero value to use the initial condition heuristics options described below.
"initial condition heuristics"

A vector of the following parameters that can be used to control the
initial condition calculation.
MXNIT
 Maximum number of Newton iterations (default is 5).
MXNJ
 Maximum number of Jacobian evaluations (default is 6).
MXNH

Maximum number of values of the artificial stepsize parameter to be
tried if the
"compute consistent initial condition"
option has been set to 1 (default is 5). Note that the maximum total number of Newton iterations allowed isMXNIT*MXNJ*MXNH
if the"compute consistent initial condition"
option has been set to 1 andMXNIT*MXNJ
if it is set to 2. LSOFF
 Set to a nonzero value to disable the linesearch algorithm (default is 0).
STPTOL
 Minimum scaled step in linesearch algorithm (default is eps^(2/3)).
EPINIT

Swing factor in the Newton iteration convergence test. The test is
applied to the residual vector, premultiplied by the approximate
Jacobian. For convergence, the weighted RMS norm of this vector
(scaled by the error weights) must be less than
EPINIT*EPCON
, whereEPCON
= 0.33 is the analogous test constant used in the time steps. The default isEPINIT
= 0.01.
"print initial condition info"
 Set this option to a nonzero value to display detailed information about the initial condition calculation (default is 0).
"exclude algebraic variables from error test"

Set to a nonzero value to exclude algebraic variables from the error
test. You must also set the
"algebraic variables"
option to declare which variables in the problem are algebraic (default is 0). "algebraic variables"

A vector of the same length as the state vector. A nonzero element
indicates that the corresponding element of the state vector is an
algebraic variable (i.e., its derivative does not appear explicitly
in the equation set.
This option is required by the
compute consistent initial condition"
and"exclude algebraic variables from error test"
options. "enforce inequality constraints"

Set to one of the following values to enforce the inequality
constraints specified by the
"inequality constraint types"
option (default is 0). To have constraint checking only in the initial condition calculation.
 To enforce constraint checking during the integration.
 To enforce both options 1 and 2.
"inequality constraint types"

A vector of the same length as the state specifying the type of
inequality constraint. Each element of the vector corresponds to an
element of the state and should be assigned one of the following
codes
 2
 Less than zero.
 1
 Less than or equal to zero.
 0
 Not constrained.
 1
 Greater than or equal to zero.
 2
 Greater than zero.
"enforce inequality constraints"
option is nonzero. "initial step size"
 Differentialalgebraic problems may occasionally suffer from severe scaling difficulties on the first step. If you know a great deal about the scaling of your problem, you can help to alleviate this problem by specifying an initial stepsize (default is computed automatically).
"maximum order"
 Restrict the maximum order of the solution method. This option must be between 1 and 5, inclusive (default is 5).
"maximum step size"
 Setting the maximum stepsize will avoid passing over very large regions (default is not specified).
Octave also includes Dassl, an earlier version of Daspk, and dasrt, which can be used to solve DAEs with constraints (stopping conditions).
 Loadable Function: [x, xdot, t_out, istat, msg] = dasrt (fcn [, g], x_0, xdot_0, t [, t_crit])
 Solve the set of differentialalgebraic equations
0 = f (x, xdot, t)
withx(t_0) = x_0, xdot(t_0) = xdot_0
with functional stopping criteria (root solving).
The solution is returned in the matrices x and xdot, with each row in the result matrices corresponding to one of the elements in the vector t_out. The first element of t should be t_0 and correspond to the initial state of the system x_0 and its derivative xdot_0, so that the first row of the output x is x_0 and the first row of the output xdot is xdot_0.
The vector t provides an upper limit on the length of the integration. If the stopping condition is met, the vector t_out will be shorter than t, and the final element of t_out will be the point at which the stopping condition was met, and may not correspond to any element of the vector t.
The first argument, fcn, is a string, or cell array of strings or inline or function handles, that names the function to call to compute the vector of residuals for the set of equations. It must have the form
res = f (x, xdot, t)
in which x, xdot, and res are vectors, and t is a scalar.
If fcn is a twoelement string array, or two element cell array, the first element names the function f described above, and the second element names a function to compute the modified Jacobian
df df jac =  + c  dx d xdot
The modified Jacobian function must have the form
jac = j (x, xdot, t, c)
The optional second argument names a function that defines the constraint functions whose roots are desired during the integration. This function must have the form
g_out = g (x, t)
and return a vector of the constraint function values. If the value of any of the constraint functions changes sign, Dasrt will attempt to stop the integration at the point of the sign change.
If the name of the constraint function is omitted,
dasrt
solves the same problem asdaspk
ordassl
.Note that because of numerical errors in the constraint functions due to roundoff and integration error, Dasrt may return false roots, or return the same root at two or more nearly equal values of T. If such false roots are suspected, the user should consider smaller error tolerances or higher precision in the evaluation of the constraint functions.
If a root of some constraint function defines the end of the problem, the input to Dasrt should nevertheless allow integration to a point slightly past that root, so that Dasrt can locate the root by interpolation.
The third and fourth arguments to
dasrt
specify the initial condition of the states and their derivatives, and the fourth argument specifies a vector of output times at which the solution is desired, including the time corresponding to the initial condition.The set of initial states and derivatives are not strictly required to be consistent. In practice, however, Dassl is not very good at determining a consistent set for you, so it is best if you ensure that the initial values result in the function evaluating to zero.
The sixth argument is optional, and may be used to specify a set of times that the DAE solver should not integrate past. It is useful for avoiding difficulties with singularities and points where there is a discontinuity in the derivative.
After a successful computation, the value of istate will be greater than zero (consistent with the Fortran version of Dassl).
If the computation is not successful, the value of istate will be less than zero and msg will contain additional information.
You can use the function
dasrt_options
to set optional parameters fordasrt
.See also daspk, dasrt, lsode
 Loadable Function: dasrt_options (opt, val)
 When called with two arguments, this function
allows you to set options parameters for the function
dasrt
. Given one argument,dasrt_options
returns the value of the corresponding option. If no arguments are supplied, the names of all the available options and their current values are displayed.Options include
"absolute tolerance"
 Absolute tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the relative tolerance must also be a vector of the same length.
"relative tolerance"

Relative tolerance. May be either vector or scalar. If a vector, it
must match the dimension of the state vector, and the absolute
tolerance must also be a vector of the same length.
The local error test applied at each integration step is
abs (local error in x(i)) <= ... rtol(i) * abs (Y(i)) + atol(i)
"initial step size"
 Differentialalgebraic problems may occasionally suffer from severe scaling difficulties on the first step. If you know a great deal about the scaling of your problem, you can help to alleviate this problem by specifying an initial stepsize.
"maximum order"
 Restrict the maximum order of the solution method. This option must be between 1 and 5, inclusive.
"maximum step size"
 Setting the maximum stepsize will avoid passing over very large regions.
"step limit"
 Maximum number of integration steps to attempt on a single call to the underlying Fortran code.
See K. E. Brenan, et al., Numerical Solution of InitialValue Problems in DifferentialAlgebraic Equations, NorthHolland (1989) for more information about the implementation of Dassl.
ISBN 095461206X  GNU Octave Manual Version 3  See the print edition 